Adjustable Trimless LED Recessed Spotlight Precivex

Precision Light, Flush-Fit Design

The Precivex is a recessed LED spotlight engineered for spaces that demand precise, directional light without visual clutter. Mounted flush with the ceiling plane, its square trimless bezel disappears into the plaster, leaving only a clean circular aperture — and a tightly focused beam of high-CRI light below. Available in single-head and dual-head configurations, in Matte Black and Matte White, the Precivex is the kind of fixture architects and interior designers specify when they want light to do the work and the ceiling to stay clean.

Adjustable Head, Fixed Intention

Each head of the Precivex tilts up to 45° from centre, allowing you to direct the beam precisely at a wall-mounted artwork, a kitchen worktop, a bedside reading position, or any focal point in the room. The adjustment mechanism is smooth and firm — it holds its position without slipping over time. The honeycomb anti-glare lens (standard on all variants) eliminates the harsh, eye-level glare typical of cheaper downlights, producing a clean cone of light that illuminates the target surface without spreading uncomfortably into the room. Beam angle is 24° standard, delivering sharp, gallery-quality spot light.

Single or Dual: Two Products, One System

The 1-Arm version (85 × 85 mm face plate, Ø75 mm ceiling cutout) is the compact workstation: a single adjustable COB head perfect for accent lighting, task light above a desk, or bedside reading light. The 2-Arm version (168 × 85 mm face plate, 160 × 75 mm cutout) doubles the output and the coverage — ideal for kitchen island task lighting, symmetrical bedside pairs from a single fitting, or accent lighting across a wider shelf or artwork. Both share the same 65 mm depth, making them compatible with standard ceiling void depths from 70 mm upwards.

COB LED: Efficiency Without Compromise

The Precivex uses an integrated COB (Chip-on-Board) LED module from Epistar — no replaceable bulb, no socket to corrode, no light source to accidentally touch. COB technology delivers higher luminous efficacy than conventional point-source LEDs, at 95–110 lm/W, with a colour rendering index above 90 Ra. Colours look true, shadows are crisp, and skin tones are flattering. Available in 9W, 12W or 15W per head (double that for the 2-Arm version), the Precivex covers everything from soft accent light to bright task illumination within the same housing, rated for 80,000 hours of service life.

Three Whites, One Fixture

Light temperature is chosen at the point of order, not left to chance: Warm White (2700–3000K) for a relaxed, residential glow, Natural White (4000–4200K) for a balanced, true-to-colour render suited to kitchens and workspaces, or Cold White (6000–6500K) for a crisp, gallery-like accent. Whichever temperature you choose, the Precivex ships flicker-free, with no strobe effect at any dimming level.

Universal Voltage, Dimmable by Default

Operating across a universal input range of 90–260V, the Precivex is compatible with UK, European, and North American wiring without an adaptor. It is fully dimmable with a compatible leading-edge or trailing-edge dimmer switch (dimmer not included). The dimming range is smooth from 100% down to approximately 10%, with no flicker at any level. For a bathroom or bedroom installation where mood lighting matters, pairing the Precivex with a quality dimmer transforms a task light into an atmospheric one.

Installation Notes

Installation requires cutting a circular hole of Ø75 mm (1-Arm) or a rectangular 160 × 75 mm opening (2-Arm) in the ceiling. The fitting depth is 65 mm, requiring a minimum void depth of 70 mm above the ceiling board. Spring clips hold the unit in place — no separate backplate or bracket required. The driver is integrated into the body, so wiring connects directly to mains supply via the provided cable tails. Suitable for plasterboard, wood, and tile ceilings, in dry indoor areas only (IP42). Ensure mains power is isolated before installation.